The System

At its core, is a new screw design (Frame Stud) that can be used with wire but can also be used with the wire removed for level hanging. 

Marking Studs are placed over the screws to mark the wall to indicate where the wall brackets are to be placed.

Henger have also developed corner brackets that can be used for level hanging and to reinforce the corners of narrow backed frames.  In doing so, relieving the stresses caused on frames by screws, D-rings and wire.

 

Advantages

There is no customer consultation required if using the Henger Frame Studs. This means that a framer can offer the system at collection instead of complicating the consultation process if they desire.  Wire can be removed to allow the customer to use the range of Henger Wall Brackets.

Frames also hang parallel to the wall with the application of bumpons/spacers, that are provided in the bags, to the bottom edge of the frame, this also allows for even airflow. 

With the use of a spirit level, the Henger system simplifies the hanging of multiple pictures in a room so they hang level and parallel to the wall and don’t go out of square.

By adopting the Henger system, it allows the framer to take some ownership over the hanging of their customers artwork instead of leaving this “sometimes stressful” process to them, while also adding a new revenue stream to their businesses.

We offer exclusive wholesale pricing to retail and wholesale framers, galleries, photographers, and studios.

Get in touch

 

FAQs

What is Henger?

The Henger hanging system has been developed to simplify the level hanging of artwork without the need for tedious measurements.

It has been designed to allow the framer to offer either traditional wire hanging or level hanging with no need to change fittings.

How does it work?

At its core, is a new framing screw design (Frame Studs) that can be used with wire but can also be used with the wire removed for level hanging.

Marking Studs are placed over the screws to mark the wall to indicate where the wall brackets are to be placed.

Henger have also developed corner brackets that can be used for level hanging and to reinforce the corners of narrow backed frames. In doing so, relieving the stresses caused on frames by screws, D-rings and wire.

How is it different?

There is no customer consultation required if using the Henger Frame Studs. This means that a framer can offer the system at collection instead of complicating the consultation process. Wire can be removed to allow the customer to use Henger Wall Brackets.

There is no need for measurement in any part of the process, the framing screws don’t even need to be installed at the same height on the frame for the system to work effectively.

Frames hang parallel to the wall with the application of spacers/bumpons to the bottom edge of the frame, this also allows for even airflow.

With the use of a spirit level or a good eye, the Henger system simplifies the hanging of multiple pictures in a room, so they hang parallel and don’t go out of square.